Mô tả sản phẩm

SUNX EX-15E

HÃNG SẢN XUẤT :	SUNX
LOẠI :	FIBER SENSORS

MÔ TẢ CHI TIẾT

TYPE		CONVERGENT REFL ECTIVE (DIFFUSED BEAM TYPE)	THRU-BEAM ・ WITH OPERATION MODE SWITCH ON BIFURCATION
		FRONT SENSING	FRONT SENSING	SIDE SENSING	FRONT SENSING	SIDE SENSING
MODEL NO. (NOTE 2)	LIGHT-ON	EX-14A (-PN)	EX-15 (NOTE 3)	EX-15E (NOTE 3)	EX-17(W) (NOTE 3, 4)	EX-17E (NOTE 3)
	DARK-ON	EX-14B (-PN)
SENSING RANGE		2 TO 25 MM 0.079TO 0.984 IN (NOTE 5) (CONV. POINT: 10 MM 0.394 IN)	150 MM 5.906 IN		500 MM 19.685 IN
MIN. SENSING OBJECT		Ø0.1 MM Ø0.004 IN COPPER WIRE (COMPLETELY BEAM INTERRUPTED OBJECT) (SETTING DISTANCE: 10 MM 0.394 IN)	Ø1 MM Ø0.039 IN OPAQUE OBJECT (COMPLETELY BEAM INTERRUPTED OBJECT) (SETTING DISTANCE BETWEEN EMITTER AND RECEIVER: 150 MM 5.906 IN)		Ø2 MM Ø0.079 IN OPAQUE OBJECT (COMPLETELY BEAM INTERRUPTED OBJECT) (SETTING DISTANCE BETWEEN EMITTER AND RECEIVER: 500 MM 19.685 IN)
HYSTERESIS		15 % OR LESS OF OPERATION DISTANCE (NOTE 5)	–
REPEATABILITY (PERPENDICULAR TO SENSING AXIS)		0.1 MM 0.004 IN OR LESS	0.05 MM 0.002 IN OR LESS
SUPPLY VOLTAGE		12 TO 24 V DC ± 10 % RIPPLE P-P 10 % OR LESS
CURRENT CONSUMPTION		20 MA OR LESS	30 MA OR LESS
OUTPUT		<NPN OUTPUT TYPE> NPN OPEN-COLLECTOR TRANSISTOR ・MAXIMUM SINK CURRENT: 50 MA ・APPLIED VOLTAGE: 30 V DC OR LESS (BETWEEN OUTPUT AND 0 V) ・RESIDUAL VOLTAGE: 1 V OR LESS (AT 50 MA SINK CURRENT) 0.4 V OR LESS (AT 16 MA SINK CURRENT) ・・・ <PNP OUTPUT TYPE> PNP OPEN-COLLECTOR TRANSISTOR ・MAXIMUM SOURCE CURRENT: 50 MA ・APPLIED VOLTAGE: 30 V DC OR LESS (BETWEEN OUTPUT AND +V) ・RESIDUAL VOLTAGE: 1 V OR LESS (AT 50 MA SOURCE CURRENT) 0.4 V OR LESS (AT 16 MA SOURCE CURRENT)	NPN OPEN-COLLECTOR TRANSISTOR ・MAXIMUM SINK CURRENT: 100 MA ・APPLIED VOLTAGE: 30 V DC OR LESS (BETWEEN OUTPUT AND 0 V) ・RESIDUAL VOLTAGE (NOTE 6): 1.5 V OR LESS (AT 100 MA SINK CURRENT) 0.4 V OR LESS (AT 16 MA SINK CURRENT)
	UTILIZATION CATEGORY	DC-12 OR DC-13	–
	SHORT-CIRCUIT PROTECTION	INCORPORATED
RESPONSE TIME		0.5 MS OR LESS (NOTE 7)
OPERATION INDICATOR		RED LED (LIGHTS UP WHEN THE OUTPUT IS ON)	ORANGE LED (LIGHTS UP WHEN THE OUTPUT IS ON), LOCATED ON THE BIFURCATION
INCIDENT BEAM INDICATOR		–	RED LED (LIGHTS UP UNDER LIGHT RECEIVED CONDITION), LOCATED ON THE RECEIVER
STABILITY INDICATOR		GREEN LED (LIGHTS UP UNDER STABLE LIGHT RECEIVED CONDITION OR STABLE DARK CONDITION)	GREEN LED (LIGHTS UP UNDER STABLE LIGHT RECEIVED CONDITION OR STABLE DARK CONDITION), LOCATED ON THE RECEIVER
POLLUTION DEGREE		3 (INDUSTRIAL ENVIRONMENT)	–
PROTECTION		IP67 (IEC)
AMBIENT TEMPERATURE		-25 TO +55 ℃ -13 TO +131 ℉ (EX-17W: -25 TO +50 ℃ -13 TO +122 ℉) (NO DEW CONDENSATION OR ICING ALLOWED), STORAGE: -30 TO +70 ℃ -22 TO +158 ℉
AMBIENT HUMIDITY		35 TO 85 % RH, STORAGE: 35 TO 85 % RH
AMBIENT ILLUMINANCE		INCANDESCENT LIGHT: 3,000 LX AT THE LIGHT-RECEIVING FACE
EMC		EN 60947-5-2	–
VOLTAGE WITHSTANDABILITY		1,000 V AC FOR ONE MIN. BETWEEN ALL SUPPLY TERMINALS CONNECTED TOGETHER AND ENCLOSURE
INSULATION RESISTANCE		20 MΩ, OR MORE, WITH 250 V DC MEGGER BETWEEN ALL SUPPLY TERMINALS CONNECTED TOGETHER AND ENCLOSURE
VIBRATION RESISTANCE		10 TO 500 HZ FREQUENCY, 3 MM 0.118 IN AMPLITUDE IN X, Y AND Z DIRECTIONS FOR TWO HOURS EACH
SHOCK RESISTANCE		500 M/S² ACCELERATION (50 G APPROX.) IN X, Y AND Z DIRECTIONS FOR THREE TIMES EACH
EMITTING ELEMENT		RED LED (PEAK EMISSION WAVELENGTH: 680 NM 0.027 MIL, MODULATED)
MATERIAL		ENCLOSURE: POLYETHYLENE TEREPHTHALATE LENS: POLYALYLATE	ENCLOSURE: POLYETHYLENE TEREPHTHALATE LENS: POLYALYLATE, BIFURCATION: POLYALYLATE
CABLE (NOTE 8)		0.1 MM² 3-CORE (THRU-BEAM TYPE EMITTER: 2-CORE) CABTYRE CABLE, 2 M 6.562 FT LONG	0.2 MM² 3-CORE CABTYRE CABLE, 2 M 6.562 FT LONG (BEYOND BIFURCATION; FROM EMITTER / RECEIVER TO BIFURCATION: 0.5 M 1.640 FT LONG)
CABLE EXTENSION		EXTENSION UP TO TOTAL 50 M 164.042 FT IS POSSIBLE WITH 0.3 MM², OR MORE, CABLE (THRU-BEAM TYPE: EMITTER AND RECEIVER).	EXTENSION UP TO TOTAL 100 M 328.084 FT IS POSSIBLE WITH 0.3 MM², OR MORE, CABLE.
WEIGHT		NET WEIGHT: 20 G APPROX. GROSS WEIGHT: 40 G APPROX	NET WEIGHT: 55 G APPROX., GROSS WEIGHT: 80 G APPROX.
ACCESSORIES		MOUNTING SCREWS: 1 SET	MOUNTING SCREWS: 1 SET, ADJUSTING SCREWDRIVER: 1 PC.