Mô tả sản phẩm

ECMA-C20604RC+ASD-B2-0421-B

MOTOR + DRIVE: ECMA-C20604RC+ASD-B2-0421-B

PACKAGE CONTENT:
1* 400W AC SERVO MOTOR
1* 400W AC SERVO DRIVE
1* 3M ENCODER CABLE & POWER CABLE

1 MOTOR SPECIFICATIONS

MODEL	ECMA-C20604RC
PRODUCT NAME	ELECTRONIC COMMUTATION MOTOR
SERVO TYPE	AC SERVO
NAME OF THE SERIES	B2
RATED VOLTAGE	220V
ENCODER TYPE	INCREMENTAL, 17-BIT
MOTOR FRAME SIZE	60MM
TYPE OF SHAFT DIAMETER AND OIL SEAL	KEYWAY(WITH FIXED SCREW HOLES) ,W/O BRAKE WITH OIL SEAL
STANDARD SHAFT DIAMETER	S=14MM
RATED POWER OUTPUT	400W
RATED TORQUE (N-M)*1	1.27
MAX. TORQUE (N-M)	3.82
RATED SPEED	3000 RPM
MAX. SPEED	5000 RPM
RATED CURRENT (A)	2.60 A
MAX. INSTANTANEOUS CURRENT (A)	7.80 A
POWER RATING (KW/S)	57.6
ROTOR INERTIA (× 10-4KG.M2)	0.277
MECHANICAL CONSTANT (MS)	0.53
TORQUE CONSTANT-KT (N-M/A)	0.49
VOLTAGE CONSTANT-KE (MV/(R/MIN))	17.4
ARMATURE RESISTANCE (OHM)	1.55
ARMATURE INDUCTANCE (MH)	6.71
ELECTRIC CONSTANT (MS)	4.30
INSULATION CLASS	CLASS A (UL), CLASS B (CE)
INSULATION RESISTANCE	> 100 M OHM , DC 500 V
INSULATION STRENGTH	1.8K VAC, 1 SEC
WEIGHT (KG) (WITHOUT BRAKE)	1.6 KG
RADIAL MAX. LOADING (N)	196
AXIAL MAX. LOADING (N)	68
POWER RATING (KW/S) (WITH BRAKE)	53.8
ROTOR INERTIA (× 10-4KG.M2) (WITH BRAKE)	0.30
MECHANICAL CONSTANT (MS) (WITH BRAKE)	0.57
VIBRATION GRADE (ΜM)	15
OPERATING TEMPERATURE	0~40 DEGREE CENTIGRADE
STORAGE TEMPERATURE	-10~80 DEGREE CENTIGRADE
OPERATING HUMIDITY	20% TO 90% RH (NON-CONDENSING)
STORAGE HUMIDITY	20% TO 90% RH (NON-CONDENSING)
VIBRATION CAPACITY	2.5G
IP RATING	IP65
APPROVALS	CE UL

2 DRIVE SPECIFICATIONS

MODEL				ASD-B2-0421-B
PRODUCT NAME				AC SERVO DRIVE
SERIES				B2
MODEL TYPE				B
POWER SUPPLY		PHASE / VOLTAGE		THREE-PHASE: 170 ~ 255VAC, 50/60HZ ±5% SINGLE-PHASE: 200 ~ 255VAC, 50/60HZ ±5%
		CONTINUOUS OUTPUT CURRENT		2.6 ARMS
COOLING METHOD				NATURAL AIR CIRCULATION
ENCODER RESOLUTION /FEEDBACK RESOLUTION				17-BIT (160000 P/REV)
MAIN CIRCUIT CONTROL				SVPWM CONTROL
TUNING MODES				AUTO/MANUAL
DYNAMIC BRAKE				–
POSITION CONTROL MODE	MAX. INPUT PULSE FREQUENCY			LINE DRIVER: MAX. 500KPPS (LOW SPEED)/MAX.4MPPS(HIGH SPEED) OPEN COLLECTOR: MAX. 200KPPS
	PULSE TYPE			PULSE + DIRECTION, A PHASE + B PHASE, CCW PULSE + CW PULSE
	COMMAND SOURCE			EXTERNAL PULSE TRAIN
	SMOOTHING STRATEGY			LOW-PASS FILTER
	ELECTRONIC GEAR			ELECTRONIC GEAR N/M MULTIPLE N: 1 ~ (2 26 -1)/M:1 ~ (2 31 -1) 1/50 < N/M < 25600
	TORQUE LIMIT OPERATION			SET BY PARAMETERS
	FEED FORWARD COMPENSATION			SET BY PARAMETERS
SPEED CONTROL MODE	ANALOG INPUT COMMAND		VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 KΩ
			TIME CONSTANT	2.2 US
	SPEED CONTROL RANGE*1			1 : 5000
	COMMAND SOURCE			EXTERNAL ANALOG SIGNAL /INTERNAL PARAMETERS
	SMOOTHING STRATEGY			LOW-PASS AND S-CURVE FILTER
	TORQUE LIMIT OPERATION			SET BY PARAMETERS OR VIA ANALOG INPUT
	RESPONSIVENESS CHARACTERISTIC			MAXIMUM 550HZ
	SPEED FLUCTUATION RATE *2(AT RATED SPEED)			0.01% OR LESS AT LOAD FLUCTUATION 0 TO 100%
				0.01% OR LESS AT POWER FLUCTUATION ±10%
				0.01% OR LESS AT 0 TO 50 DEGREE CENTIGRADE AMBIENT TEMPERATURE FLUCTUATION
TORQUE CONTROL MODE	ANALOG COMMAND INPUT		VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 KΩ
			TIME CONSTANT	2.2 US
	COMMAND SOURCE			EXTERNAL ANALOG SIGNAL / INTERNAL PARAMETERS
	SMOOTHING STRATEGY			LOW-PASS FILTER
	SPEED LIMIT OPERATION			PARAMETER SETTING OR VIA ANALOG INPUT
ANALOG MONITOR OUTPUT				MONITOR SIGNAL CAN SET BY PARAMETERS (OUTPUT VOLTAGE RANGE: ±8 V)
COMMUNICATION INTERFACE				RS-232/RS-485