Mô tả sản phẩm

PLC XINJE XC3-48R-E

PLC XINJE XC3-48R-E

XC3-48R-E XINJE XC3 SERIES PLC AC220V DI 28 DO 20 RELAY NEW IN BOX

FEATURES:

28 DI/20 DO, AC220 OR DC24V POWER SUPPLY;

CAN BE EXPANDED WITH EXPANSION MODULE, BD BOARD AND CLOCK;

POWER-OFF RETENTIVE;

SUPPORT BASIC LOGIC CONTROL AND DATA OPERATION;

SUPPORT HIGH SPEED COUNT, PULSE OUTPUT, EXTERNAL INTERRUPTION, C LANGUAGE FUNCTION BLOCK, FREE SWITCH FOR I/O POINTS, FREE PROTOCOL COMMUNICATION AND MODBUS COMMUNICATION.

GENERAL SPECIFICATIONS:

ITEM	SPECIFICATION
INSULATION VOLTAGE	ABOVE DC 500V 2MOHM
NOISE RESISTANCE	1000V 1US PULSE FOR 1 MINUTE
ENVIRONMENT TEMPERATURE	0CENTIGRADE DEGREE~6CENTIGRADE DEGREE
AMBIENT HUMIDITY	5%~95%
COM 1	RS-232, BE CONNECTED TO HOST MACHINE OR HMI FOR PROGRAMMING OR DEBUGGING
COM 2	RS-485/RS-232, NETWORK OR CONNECT TO INTELLIGENT INSTRUMENT, INVERTER, ETC.
COM 3	BD EXTENSIONAL COMMUNICATION PORT RS-485/RS232
INSTALLATION	M3 SCREW FIXED OR DIN46277 (35MM WIDTH) GUIDE RAIL INSTALLATION
GROUNDING	THE THIRD TYPE GROUNDING (NEVER PERFORM COMMON GROUNDING WITH STRONG POWER SYSTEM)

PERFORMANCE:

ITEM		SPECIFICATION
PROGRAM OPERATION MODE		CIRCULATION SCANNING MODE, TIMING SCANNING MODE
PROGRAM MODE		INSTRUCTIONS AND LADDER CHART
DISPOSE SPEED		0.5US
POWER FAILURE HOLDING		FLASHROM
USER PROGRAM’S CAPACITY		8000 STEPS
I/O POINTS		28 INPUT POINTS, 20 OUTPUT POINTS
OUTPUT FORMAT		RELAY
POWER SUPPLY		AC220V/DC24V
INTERIOR COIL’S POINTS (M)		8512 POINTS
TIMER(T)	POINTS	620 POINTS
	SPECIFICATION	100MS TIMER: SET TIME 0.1~3276.7 SECONDS 10MS TIMER: SET TIME 0.01~327.67 SECONDS 1MS TIMER: SET TIME 0.001~32.767 SECONDS
COUNTER(C)	POINTS	635 POINTS
	SPECIFICATION	16 BITS COUNTER: SET VALUE K0~32767 32 BITS COUNTER: SET VALUE K0~2147483647
DATA REGISTER(D)		8512 CHARACTERS
FLASHROM REGISTER(FD)		2048 CHARACTERS
HIGH-SPEED COUNT FORMAT		HIGH SPEED COUNTER, PULSE OUTPUT, EXTERIOR INTERRUPTION
TIMING SCANNING INTERVAL SETTING		1~99MS
PASSWORD PROTECTION		6 CHARACTERS ASCII
SELF-DIAGNOSE FUNCTION		POWER ON SELF-DIAGNOSE, MONITOR TIMER, GRAMMAR CHECK