Mô tả sản phẩm
AMPLIFIER AP-C40WP
INPUT AND OUTPUT CIRCUIT DIAGRAM
MODEL |
AP-C40WP
|
||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HEAD COMBINATION | AP-41M | AP-41 | AP-43 | AP-44 |
AP-48
|
||||||||||
RATING | POWER-SUPPLY VOLTAGE | RIPPLE (PP) 10% OR LESS DC12-24V ± 10% | |||||||||||||
POWER CONSUMPTION |
|
||||||||||||||
DISPLAY TYPE | DISPLAY BY 7 SEGMENT LED 2 COLOR 3 +1 / 2 DIGIT (CHARACTER HEIGHT 11MM) DISPLAY CYCLE: 10 TIMES / SECOND |
||||||||||||||
SET / DISPLAY RANGE ※ 1 | -15 ~ +110% OF FS | ||||||||||||||
OPERATION INDICATOR | (CORRESPONDING TO THE CONTROL OUTPUT 1 / OUTPUT CONTROL 2) RED LED × 2 | ||||||||||||||
RESOLUTION | STANDARD MODE | KPA | 0.1 | 0.1 | 0.001MPA | 0.1 | 0.1 | ||||||||
KGF / CM2 | – | – | 0.01 | – | 0.001 | ||||||||||
MMHG | ONE | ONE | – | ONE | – | ||||||||||
INHG | 0.1 | 0.1 | – | 0.1 | – | ||||||||||
PSI | – | – | – | 0.02 | 0.02 | ||||||||||
BAR | 0.001 | 0.001 | 0.01 | 0.001 | 0.001 | ||||||||||
FOCUS MODE | KPA | 0.01 | 0.01 | 0.1 | 0.02 | 0.02 | |||||||||
KGF / CM2 | – | – | 0.001 | – | 0.2GF/CM 2 | ||||||||||
MMHG | 0.1 | 0.1 | – | 0.2 | – | ||||||||||
INHG | 0.01 | 0.01 | – | 0.01 | – | ||||||||||
PSI | 0.002 | 0.002 | 0.02 | 0.004 | 0.004 | ||||||||||
BAR | 0.1MBAR | 0.1MBAR | 0.001 | 0.2MBAR | 0.2MBAR | ||||||||||
HYSTERESIS (HYSTERESIS) | STANDARD: 0.5% OF FS / FOCUS MODE: 0.1% OF FS / HYSTERESIS VARIABLE MODE (F-2) AT THE TIME: VARIABLE |
||||||||||||||
DISPLAY TEMPERATURE CHARACTERISTICS | ± OF FS LESS THAN 1% | ||||||||||||||
RESPONSE (CHATTERING PREVENTION FUNCTION) |
(1MS HIGH SPEED SELECTED) 1/2.5/5/100/500MS SELECTION | ||||||||||||||
ZERO SHIFT INPUT | (SWITCHING AND ANALOG OUTPUT) 2MS OR MORE INPUT TIME | ||||||||||||||
CONTROL OUTPUT | PNP OPEN COLLECTOR UP TO 100MA (30V OR LESS) RESIDUAL VOLTAGE BELOW 1V, 2 OUTPUT (NO / NC CHANGEABLE) |
||||||||||||||
ANALOG OUTPUT | (SWITCHING AND ZERO SHIFT INPUT) 1-5V OUTPUT IMPEDANCE 1KΩ OR LESS | ||||||||||||||
耐環 BORDER OF |
AMBIENT TEMPERATURE |
THE (NON-FREEZING) 0 ~ +50 ℃ | |||||||||||||
AMBIENT HUMIDITY |
(NON-CONDENSING) 35 ~ 85% RH | ||||||||||||||
VIBRATION RESISTANCE | 10 ~ 55HZ DOUBLE AMPLITUDE 1.5MM X, Y, 2 HOURS AND Z DIRECTIONS | ||||||||||||||
MATERIAL | FRONT CASE: POLYSULFONE, REAR CASE: PBT, FRONT SEAT: POLYCARBONATE |
||||||||||||||
MASS | ABOUT 74G (WITH 2M CABLE) | ||||||||||||||
ACCESSORIES | POWER CORD (2M, CONNECTOR TYPE), HEAD CONNECTOR, UNIT LABEL |
Đánh giá
Chưa có đánh giá nào.