SENSOR AP-C35

SENSOR AP-C30WP

Giá:

SENSOR AP-C30WP

Mô tả sản phẩm

SENSOR AP-C30WP

INPUT AND OUTPUT CIRCUIT DIAGRAM

 

Input and output circuit diagram _AP-C30WP
TYPE
MULTI-RANGE
MODEL
AP-C30WP
RATED PRESSURE RANGE UNIT NEGATIVE PRESSURE POSITIVE PRESSURE COMPOUND PRESSURE
KPA 0 TO -101.3 0 TO 100.0 ~ 101.3 -101.3
KGF / CM 2 0 TO -1.033 0 TO 1.020 ~ 1.033 -1.033
MMHG 0 TO -760 0-750 760 TO -760
INHG 0 TO -29.9 0 TO 29.5 29.9 ~ -29.9
PSI 0 TO -14.69 0 TO 14.50 14.69 -14.69 –
HAR 0 TO -1.013 0 TO 1.000 ~ 1.013 -1.013
WITHSTANDING PRESSURE 500KPA
APPLICABLE FLUID AIR AND NON-CORROSIVE GAS
KIND OF PRESSURE GAUGE PRESSURE
RATING POWER-SUPPLY VOLTAGE RIPPLE (PP) 10% OR LESS DC12-24V ± 10%
POWER CONSUMPTION
12V WHEN
24V WHEN
USUALLY 900MW (75MA) OR LESS 1320MW (55MA) OR LESS
ECO-MODE 600MW (50MA) OR LESS 960MW (40MA) OR LESS
DISPLAY TYPE 7-SEGMENT LED 2 COLOR 3 +1 / 2 DIGIT (CHARACTER HEIGHT 11MM) DISPLAY CYCLE: 10 TIMES / SECOND
SET / DISPLAY RANGE -10 ~ +110% OF FS
OPERATION INDICATOR (CORRESPONDING TO THE CONTROL OUTPUT 1 / OUTPUT CONTROL 2) RED LED × 2
RESOLUTION UNIT NEGATIVE PRESSURE POSITIVE PRESSURE COMPOUND PRESSURE
KPA 0.1 0.1 0.2
KGF / CM 2 0.001 0.001 0.002
MMHG ONE ONE TWO
INHG 0.1 0.1 0.1
PSI 0.02 0.02 0.04
BAR 0.001 0.001 0.002
REPEAT ACCURACY ± 0.2% OF FS
HYSTERESIS (HYSTERESIS) STANDARD: 0.5% OF FS / FOCUS MODE: 0.2% OF FS /
HYSTERESIS VARIABLE MODE (F-2) AT THE TIME: VARIABLE
DISPLAY TEMPERATURE CHARACTERISTICS ± OF FS LESS THAN 1%
RESPONSE (ANTI-CHATTERING FUNCTION) 2.5/5/100/500MS SELECTION
ZERO SHIFT INPUT (SWITCHING AND ANALOG OUTPUT) 2MS OR MORE INPUT TIME
CONTROL OUTPUT PNP OPEN COLLECTOR
UP TO 100MA (30V OR LESS) RESIDUAL VOLTAGE BELOW 1V,
2 OUTPUT (NO / NC CHANGEABLE)
ANALOG OUTPUT 1-5V OUTPUT IMPEDANCE 1KΩ OR LESS
(SWITCHING AND ZERO SHIFT INPUT)
ENVIRONMENT RESISTANCE AMBIENT TEMPERATURE THE (NON-FREEZING) 0 ~ +50 ℃
AMBIENT HUMIDITY (NON-CONDENSING) 35 ~ 85% RH
VIBRATION RESISTANCE 10 ~ 55HZ DOUBLE AMPLITUDE 1.5MM X, Y, 2 HOURS AND Z DIRECTIONS
PRESSURE PORT ROTARY RC (PT) 1/8 180 DEGREE
MATERIAL FRONT CASE: POLYSULFONE, REAR CASE: PBT,
FRONT SEAT: POLYCARBONATE, PRESSURE PORT: ZINC DIE-CASTING
MASS (WITHOUT CABLE) ABOUT 30G / ABOUT 85G (WITH 2M CABLE)
ACCESSORIES (2M, CONNECTOR TYPE) POWER CORD

CÔNG TY CỔ PHẦN SẢN XUẤT VÀ THƯƠNG MẠI PHẠM DƯƠNG

TRỤ SỞ: SN27, HẺM 201/12/20 ĐƯỜNG PHÚC LỢI, TỔ 6, P. PHÚC LỢI, Q. LONG BIÊN, HNOI.

MST: 0105176667

VPGD: SN 16/469, ĐƯỜNG NGUYỄN TRÃI, QUẬN THANH XUÂN, TP. HÀ NỘI.

TEL: 0485.854.668 FAX: 0462.852.262

HOTLINE: 0974 596 569 – 0945 627 188 – 0976 844 195 – 0968 627 188

EMAIL: INFO@PHAMDUONGJSC.COM.VN – PHAMDUONGJSC@GMAIL.COM

WEBSITE: HTTP://PHAMDUONGJSC.COM.VN/ HTTP://PHAMDUONGJSC.COM/

WEBSITE: HTTP://SUNXVIETNAM.COM/ HTTP://TUDONGHOA365.COM/

WEBSITE: HTTP://PLC-HMI-SENSOR.COM.

 

 

 

 

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “SENSOR AP-C30WP”

Thư điện tử của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *