20590_thumb_G_1483574454291

HF-SP202+MR-J3-200AN

Giá:

Mô tả sản phẩm

HF-SP202+MR-J3-200AN

HF-SP202+MR-J3-200AN 10A 2KW 9.55NM 2000R/MIN SERVO MOTOR DRIVE KIT WITH 3M CABLE

MOTOR SPECIFICATIONS:

SERVO MOTOR MODEL HF-SP

52 (B)

HF-SP

102 (B)

HF-SP

152 (B)

HF-SP

202 (B)

HF-SP

352 (B)

HF-SP

502 (B)

HF-SP

702 (B)

SERVO AMPLIFIER MODEL MR-J3-60A/B/T MR-J3-100A/B/T MR-J3-200A/B/T MR-J3-200A/B/T MR-J3-350A/B/T MR-J3-500A/B/T MR-J3-700A/B/T
POWER FACILITY CAPACITY 1.0

[KVA]

1.7[KVA] 2.5[KVA] 3.5[KVA] 5.5[KVA] 7.5[KVA] 10[KVA]
RATED OUTPUT 0.5

[KW]

1.0[KW] 1.5[KW] 2.0[KW] 3.5[KW] 5.0[KW] 7.0[KW]
RATED TORQUE 2.39

[NM]

4.77[NM] 7.16[NM] 9.55[NM] 16.7[NM] 23.9[NM] 33.4[NM]
MAXIMUM TORQUE 7.16

[NM]

14.3[NM] 21.5[NM] 28.6[NM] 50.1[NM] 71.6[NM] 100[NM]
RATED ROTATION SPEED 2000

[RPM]

2000

[RPM]

2000

[RPM]

2000

[RPM]

2000

[RPM]

2000

[RPM]

2000

[RPM]

MAXIMUM ROTATION SPEED 3000

[RPM]

3000

[RPM]

3000

[RPM]

3000

[RPM]

3000

[RPM]

3000

[RPM]

3000

[RPM]

PERMISSIBLE INSTANTANEOUS ROTATION SPEED 3450 3450 3450 3450 3450 3450 3450
POWER RATE AT CONTINUOUS RATED TORQUE 9.34

KW/S

19.2

[KW/S]

28.8

[KW/S]

23.8

[KW/S]

37.2

[KW/S]

58.8

[KW/S]

72.5

[KW/S]

RATED CURRENT 2.9A 5.3[A] 8.0[A] 10[A] 16[A] 24[A] 33[A]
MAXIMUM CURRENT 8.7A 15.9[A] 24[A] 30[A] 48[A] 72[A] 99[A]
WEIGHT 4.8KG 6.5[KG] 8.3[KG] 12[KG] 19[KG] 22[KG] 32[KG]

DRIVE SPECIFICATIONS:

MODEL NAME MR-J3-200AN
POWER SUPPLY VOLTAGE/FREQUENCY 3-PHASE 200 TO 230VAC, 50/60HZ
PERMISSIBLE VOLTAGE FLUCTUATION 3-PHASE 170 TO 253VAC
PERMISSIBLE FREQUENCY FLUCTUATION WITHIN ±5%
POWER SUPPLY CAPACITY REFER TO SECTION 11.2
INRUSH CURRENT REFER TO SECTION 11.5
CONTROL CIRCUIT

POWER SUPPLY

VOLTAGE, FREQUENCY 1-PHASE 200 TO 230VAC, 50/60HZ
PERMISSIBLE VOLTAGE

FLUCTUATION

1-PHASE 170 TO 253VAC
PERMISSIBLE FREQUENCY

FLUCTUATION

WITHIN ±5%
INPUT 30W
INRUSH CURRENT REFER TO SECTION 11.5
INTERFACE POWER

SUPPLY

VOLTAGE 24VDC± 10%
POWER SUPPLY CAPACITY (NOTE 1) 300MA OR MORE
CONTROL SYSTEM SINE-WAVE PWM CONTROL, CURRENT CONTROL SYSTEM
DYNAMIC BRAKE BUILT-IN
POSITION CONTROL MODE MAX. INPUT PULSE FREQUENCY 1MPPS (FOR DIFFERENTIAL RECEIVER), 200KPPS (FOR OPEN COLLECTOR)
COMMAND PULSE MULTIPLYING FACTOR ELECTRONIC GEAR A:1 TO 1048576 , B:1 TO 1048576, 1/10 A/B 2000
IN-POSITION RANGE SETTING 0 TO ±10000 PULSE (COMMAND PULSE UNIT)
ERROR EXCESSIVE ±3 REVOLUTIONS
TORQUE LIMIT SET BY PARAMETER SETTING OR EXTERNAL ANALOG INPUT (0 TO 10VDC/MAXIMUM TORQUE)
SPEED CONTROL MODE SPEED CONTROL RANGE ANALOG SPEED COMMAND 1: 2000, INTERNAL SPEED COMMAND 1: 5000
ANALOG SPEED COMMAND INPUT 0 TO ±10VDC / RATED SPEED
SPEED FLUCTUATION RATIO ±0.01% OR LESS (LOAD FLUCTUATION 0 TO 100%)

0% (POWER FLUCTUATION 10%)

±0.2% OR LESS (AMBIENT TEMPERATURE 25± 10CENTIGRADE DEGREE WHEN USING ANALOG SPEED COMMAND

TORQUE LIMIT SET BY PARAMETER SETTING OR EXTERNAL ANALOG INPUT (0 TO 10VDC/MAXIMUM TORQUE)
TORQUE

CONTROL

MODE

ANALOG TORQUE COMMAND INPUT 0 TO ±8VDC / MAXIMUM TORQUE (INPUT IMPEDANCE 10 TO 12K )
SPEED LIMIT SET BY PARAMETER SETTING OR EXTERNAL ANALOG INPUT (0 TO ±10VDC/RATED SPEED)
STRUCTURE FORCE-COOLING, OPEN (IP00)
WEIGHT(KG) 2.1

 

CÔNG TY CỔ PHẦN SẢN XUẤT VÀ THƯƠNG MẠI PHẠM DƯƠNG
TRỤ SỞ: SN 27, HẺM 201/12/20 ĐƯỜNG PHÚC LỢI, TỔ 6, P. PHÚC LỢI, Q. LONG BIÊN, TP. HÀ NỘI.
VPGD: SN 16/469 ĐƯỜNG NGUYỄN TRÃI – QUẬN THANH XUÂN – TP. HÀ NỘI.
TEL: 0485 854 668 FAX: 0462 852 262
HOTLINE: 0974 596 569 – 09456 27188 – 0976 844 195 – 0968 627 188
EMAIL: INFO@PHAMDUONGJSC.COM.VN – PHAMDUONGJSC@GMAIL.COM
WEBSITE: HTTP://PHAMDUONGJSC.COM.VN OR HTTP://SUNXVIETNAM.COM
HTTP://PHAMDUONGJSC.COM OR HTTP://TUDONGHOA365.COM OR HTTP://CONGNGHIEPHOA.NET

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “HF-SP202+MR-J3-200AN”

Thư điện tử của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *